User Tools

Site Tools


prime:polrec

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
prime:polrec [2017/10/20 17:45]
webmasterpdx
prime:polrec [2017/10/20 19:13] (current)
webmasterpdx
Line 9: Line 9:
 Note that if your system is set to radians by default, you can enter degrees by using shift-units and from the units menu, select angle-deg and the value will appear as 30_deg for example. Note that if your system is set to radians by default, you can enter degrees by using shift-units and from the units menu, select angle-deg and the value will appear as 30_deg for example.
 if you type 1∠30_deg and hit enter, it'll convert automatically to 1∠0.5325... (radians). if you type 1∠30_deg and hit enter, it'll convert automatically to 1∠0.5325... (radians).
-To enter a point this way in the geometry app, you cannot enter point(1∠30_deg),​ but you can enter 1∠30 on the home view and hit enter to convert to radians. Then, in the geometry app, you can enter point() and select menu-copy_from_home and select the radian version to put it in the point call.+To enter a point this way in the geometry app, you cannot enter point(1∠30_deg),​ but you can enter 1∠30 on the home view and hit enter to convert to radians. Then, in the geometry app, you can enter point() and select menu-copy_from_home and select the radian version to put it in the point call. You can alternatively enter point(EXPR("​1∠30_deg"​)).
  
 The following function is a useful one to have in your arsenal. It will convert from polar to rectangular and vice versa...automatically. The following function is a useful one to have in your arsenal. It will convert from polar to rectangular and vice versa...automatically.
prime/polrec.txt · Last modified: 2017/10/20 19:13 by webmasterpdx